- Pumper proportioning system
- Seawater compatible
- All brass construction
- Adjustable proportioning
- Solution flow rate 775 gpm-4650 gpm
The Feecon FoaMidget is a simple, inexpensive and portable self contained around-the-pump foam proportioner that instantly converts any municipal water pumper into a foam proportioning pumper. The proportioner is simply threaded into the 2-1/2 inch (63mm) auxiliary suction connection on the water pump and fed from a 1-1/2 inch (38mm) discharge outlet. The foam pickup tube is inserted into the foam container and the appropriate valve setting dialed into the proportioner body. The FoaMidget allows for different flow requirements in any flow combination.
A portion of the water pump output passes through the 1-1/2 inch (38mm) hose to the eductor where foam concentrate is metered into the water stream. The foam solution then passes through the auxiliary water pump suction and into the main water pump stream where it is mixed and distributed to all open outlet connections.
Pump pressures between 125 PSI (9 bar) and 250 PSI (17 bar) are recommended. As with any around-the-pump type system all pump outlets will have either foam or water at the same time. Pump suction pressure is limited to 5 PSI (0.3 bar).
When not in use, the FoaMidget stores easily in a truck compartment.